The SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
The SaniForce 1040e combine all of the benefits of a traditional air operated diaphragm pump like self-priming, stalling under pressure and increased diaphragm life with the benefits of an electric pump like energy cost savings, reduced pulsation and increased pump control.
Factory Stock
| Dimensions | |
|---|---|
| Unit Length | 37.5 (in) |
| Unit Volume | 15.767415 (ft³) |
| Unit Weight | 208 (lb) |
| Unit Width | 23.25 (in) |
| Unit Height | 31.25 (in) |
| Attributes | |
|---|---|
| Maximum Solid Size | 0.3175 (cm) |
| Maximum Air Pressure | 80 (psi) |
| Maximum Operating Temperature | 104 (°F) |
| Maximum Operating Temperature | 40 (°C) |
| Maximum Motor Speed | 1800 (RPM) |
| Maximum Fluid Pressure | 70 (psi) |
| Maximum Fluid Pressure | 0.48 (MPa) |
| Maximum Fluid Pressure | 480 (kPa) |
| Maximum Fluid Pressure | 4.8 (bar) |
| Maximum Flow Rate | 132 (L/min) |
| Maximum Flow Rate | 35 (GPM) |
| Maximum Cycle Rate | 280 (CPM) |
| Voltage | 460 |
| Maximum Solid Size | 0.125 (in) |
| Maximum Solid Size | 3.175 (mm) |
| Maximum Storage Temperature | 40 (°C) |
| Maximum Storage Temperature | 104 (°F) |
| Minimum Operating Temperature | 32 (°F) |
| Minimum Storage Temperature | 32 (°F) |
| Motor Type | AC |
| Power Rating | 2 (HP) |
| Power Source | Electric |
| Seat Material | Stainless Steel |
| Standards Met | CE |
| Type | Electric Diaphragm Pump |
| Diaphragm Material | PTFE/EPDM Overmold |
| UPC Code | 00755652319481 |
| Model | SaniForce |
| Series | 1040e |
| Air Inlet Size | 3/8 (in) |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Center Section Material | Stainless Steel |
| Compatible Material | Food;Personal Care |
| Connection Type | Tri-Clamp |
| Diaphragm Compatible Material | PTFE |
| Maximum Air Pressure | 0.55 (MPa) |
| Fluid Inlet Size | 3.81 (cm) |
| Fluid Inlet Size | 1-1/2 (in) |
| Fluid Inlet Size | 38.1 (mm) |
| Fluid Outlet Size | 3.81 (cm) |
| Fluid Outlet Size | 1-1/2 (in) |
| Fluid Outlet Size | 38.1 (mm) |
| Fluid Section Material | Stainless Steel |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |
| Material | Stainless Steel |
| Maximum Air Pressure | 5.5 (bar) |
| Maximum Air Pressure | 550 (kPa) |