You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

GRACO
D53911

$1,375.00

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

  • GRACO
  • Material:D53911
  • Model:HUSKY PUMP,716A-PP01AA1PPPTPTPT0
  • Summary:

    The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Factory Stock

Graco D53911 Husky 716 AL AODD Metal Pump with NPT Standard Air Valve, PP Seat, PP Ball, & PP Diaphragm
  • Center- and end-porting
  • No mechanical seals which causes fluid leaks or failures
  • Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks
  • 3/4 in (19.05 mm) center- and end-porting
  • No seals to leak or fail
  • Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks

Dimensions
Unit Length 10.8 (in)
Unit Volume .63 (ft³)
Unit Weight 11 (lb)
Unit Width 8.4 (in)
Unit Height 12 (in)

Attributes
Maximum Fluid Pressure 0.69 (MPa)
Material Aluminum
Maximum Fluid Pressure 690 (kPa)
Maximum Fluid Pressure 6.9 (bar)
Maximum Flow Rate 60.6 (L/min)
Maximum Flow Rate 16 (GPM)
Maximum Cycle Rate 400 (CPM)
Maximum Air Pressure 100 (psi)
Maximum Air Pressure 0.69 (MPa)
Maximum Air Pressure 690 (kPa)
Maximum Air Pressure 6.9 (bar)
Maximum Air Consumption 28 (SCFM)
Weight 8.5 (lb)
Maximum Fluid Pressure 100 (psi)
Maximum Operating Temperature 107 (°C)
Maximum Operating Temperature 225 (°F)
Maximum Solid Size 0.2383 (cm)
Maximum Solid Size 0.09375 (in)
Maximum Solid Size 2.383 (mm)
Minimum Operating Temperature 4 (°C)
Minimum Operating Temperature 40 (°F)
Power Source Air
Seat Material Polypropylene
Standards Met ATEX;CE
Type Pneumatic Diaphragm Pump
Diaphragm Material PTFE/EPDM 2-Piece
UPC Code 00633955902541
Model Husky
Series 716
Air Inlet Size 1/4 (in)
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material PTFE
Center Section Material Polypropylene
Compatible Material Antifreeze;Detergents;Motor Oil;Grease & Oil;Hydraulic Fluid;Cutting Oil;Water - Wastewater Treatment;Water;Ink
Connection Type Threaded
Diaphragm Compatible Material PTFE
Manifold O-Ring Material PTFE
Fluid Inlet Size 1.905 (cm)
Fluid Inlet Size 3/4 (in)
Fluid Inlet Size 19.05 (mm)
Fluid Inlet Thread Gender Female
Fluid Inlet Thread Type NPT
Fluid Outlet Size 1.905 (cm)
Fluid Outlet Size 3/4 (in)
Fluid Outlet Size 19.05 (mm)
Fluid Outlet Thread Gender Female
Fluid Outlet Thread Type NPT
Fluid Section Material Aluminum
Manifold Configuration Center Port