You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
FREE SHIPPING On Orders Over $499! Some exclusions apply. See details
Image not available

GRACO
D5C266

$1,220.00

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

  • GRACO
  • Material:D5C266
  • Model:HUSKY PUMP,716A-PP01AA2ACSPSPPT0
  • Summary:

    The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Factory Stock

Graco D5C266 Husky 716 AL Air Operated Double Diaphragm Metal Pump, AC/SP/SP
  • Center- and end-porting
  • No mechanical seals which causes fluid leaks or failures
  • Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks
  • 3/4 in (19.05 mm) center- and end-porting
  • No seals to leak or fail
  • Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
  • Easy-to-service air valve and ball checks

Dimensions
Unit Length 10.8 (in)
Unit Volume .63 (ft³)
Unit Weight 10 (lb)
Unit Width 8.4 (in)
Unit Height 12 (in)

Attributes
Maximum Fluid Pressure 690 (kPa)
Material Aluminum
Maximum Fluid Pressure 6.9 (bar)
Maximum Flow Rate 60.6 (L/min)
Maximum Flow Rate 16 (GPM)
Maximum Cycle Rate 400 (CPM)
Maximum Air Pressure 100 (psi)
Maximum Air Pressure 0.69 (MPa)
Maximum Air Pressure 690 (kPa)
Maximum Air Pressure 6.9 (bar)
Maximum Air Consumption 28 (SCFM)
Type Pneumatic Diaphragm Pump
Maximum Fluid Pressure 0.69 (MPa)
Maximum Fluid Pressure 100 (psi)
Maximum Operating Temperature 107 (°C)
Maximum Operating Temperature 225 (°F)
Maximum Solid Size 0.2383 (cm)
Maximum Solid Size 0.09375 (in)
Maximum Solid Size 2.383 (mm)
Minimum Operating Temperature 4 (°C)
Minimum Operating Temperature 40 (°F)
Power Source Air
Seat Material Acetal
Standards Met ATEX;CE
Diaphragm Compatible Material Santoprene
UPC Code 00633955903708
Model Husky
Series 716
Air Inlet Size 1/4 (in)
Air Inlet Thread Gender Female
Air Inlet Thread Type NPT
Application Industrial
Ball Material Santoprene
Center Section Material Polypropylene
Compatible Material Antifreeze;Detergents;Motor Oil;Grease & Oil;Hydraulic Fluid;Cutting Oil;Water - Wastewater Treatment;Water;Ink
Connection Type Threaded
Manifold O-Ring Material PTFE
Diaphragm Material Santoprene
Fluid Inlet Size 1.905 (cm)
Fluid Inlet Size 3/4 (in)
Fluid Inlet Size 19.05 (mm)
Fluid Inlet Thread Type BSPT
Fluid Outlet Size 1.905 (cm)
Fluid Outlet Size 3/4 (in)
Fluid Outlet Size 19.05 (mm)
Fluid Outlet Thread Type BSPT
Fluid Section Material Aluminum
Manifold Configuration Center Port