Factory Stock
| Dimensions | |
|---|---|
| Unit Length | 19.2 (in) |
| Unit Volume | 8.4 (ft³) |
| Unit Weight | 61.8 (lb) |
| Unit Width | 25.2 (in) |
| Unit Height | 30 (in) |
| Attributes | |
|---|---|
| Maximum Air Consumption | 175 (SCFM) |
| Type | Pneumatic Diaphragm Pump |
| Maximum Air Pressure | 8.27 (bar) |
| Maximum Air Pressure | 827 (kPa) |
| Maximum Air Pressure | 0.827 (MPa) |
| Maximum Air Pressure | 120 (psi) |
| Maximum Cycle Rate | 145 (CPM) |
| Maximum Flow Rate | 150 (GPM) |
| Maximum Flow Rate | 568 (L/min) |
| Maximum Fluid Pressure | 8.27 (bar) |
| Maximum Fluid Pressure | 827 (kPa) |
| Maximum Fluid Pressure | 0.827 (MPa) |
| Maximum Fluid Pressure | 120 (psi) |
| Maximum Operating Temperature | 66 (°C) |
| Maximum Operating Temperature | 150 (°F) |
| Maximum Solid Size | 0.635 (cm) |
| Maximum Solid Size | 0.25 (in) |
| Maximum Solid Size | 6.35 (mm) |
| Power Source | Air |
| Seat Material | Polypropylene |
| Standards Met | ATEX;CE |
| Diaphragm Compatible Material | PTFE |
| UPC Code | 00755652269465 |
| Model | Husky |
| Series | 2150 |
| Air Inlet Size | 1/2 (in) |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Industrial |
| Ball Material | PTFE |
| Center Section Material | Aluminum |
| Compatible Material | Antifreeze;Detergents;Motor Oil;Hydraulic Fluid;Water - Wastewater Transfer |
| Material | Conductive Polypropylene |
| Diaphragm Material | PTFE/EPDM 2-Piece |
| Fluid Inlet Size | 5.08 (cm) |
| Fluid Inlet Size | 2 (in) |
| Fluid Inlet Size | 50.8 (mm) |
| Fluid Outlet Size | 5.08 (cm) |
| Fluid Outlet Size | 2 (in) |
| Fluid Outlet Size | 50.8 (mm) |
| Fluid Section Material | Conductive Polypropylene |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |